• Find
Product Image Name Description Category Manufacturer
pml-high-z-probes
PML High-Z Probes

The compact built of the PML Series with a diameter of 2.5 mm at the Probe Tip facilitates measurements in dense SMD circuits, because of the good visibility of the device under test its small body provides.The low input capacitance loads the measuring point with only 9.5 pF. Less load is only achieved by active probes.

Passive Probes PMK
tetris-1000
TETRIS® 1000

High Impedance Active Probe.

Active Probe can contact adjacent square pins in  2.54 mm pitch simultaneously. The probe‘s housing is T-shaped  so that many probes can be positioned next to each other in a never ending chain.

Active Probe System PMK
pml-low-z-probes
PML Low-Z Probes

The compact built of the PML Series with a diameter of 2.5 mm at the Probe Tip facilitates measurements in dense SMD circuits, because of the good visibility of the device under test its small body provides.

Passive Probes PMK
tetris-1500
TETRIS® 1500

High Impedance Active Probe.
Active Probe can contact adjacent square pins in 2.54 mm pitch simultaneously. The probe‘s housing is T-shaped so that many probes can be positioned next to each other in a never ending chain

Active Probe System PMK
pms-high-z-probes
PMS High-Z Probes

PMK‘s standard probes of the PMS, PMT and PMTG series are partly switchable and reach bandwidths of up to 350 MHz in 10:1 mode. Probes of the PMS series are mainly used for scopes of up to 60 MHz. The REED switches we use have a breakdown voltage greater than 4000 V. Another advantage is their long lifetime with over 500,000 switching cycles. All probes are available with a standard cable length of 1.2 m as well as 2 and 3 meters. All PMS probes are sent with BNC connectors by default.

Passive Probes PMK
phv-series
PHV Series

PHV Series of Probes extend the measuring range of your oscilloscope to probe high voltages safely and easily.
Applications are power supplies and UPS-devices, frequency changers and electrical inverters in power train engineering, semiconductor relays and IGBT's.
Our high voltage probes are suitable to view fastest signal and waveform events e. g. norm pulses in EMC testing or glitches you want to detect.

High-Voltage Probes PMK
pmm-probes
PMM Probes

Coaxial Design
IC Contacting System for 0.8 - 1.27 mm pitch
Needlesharp Exchangeable Spring Tip 0.38 mm

Passive Probes PMK
phvs-series
PHVS series

PHVS Series of Probes extend the measuring range of your oscilloscope to probe high voltages safely and easily.
Applications are power supplies and UPS-devices, frequency changers and electrical inverters in power train engineering, semiconductor relays and IGBT's.
Our high voltage probes are suitable to view fastest signal and waveform events e. g. norm pulses in EMC testing or glitches you want to detect

High-Voltage Probes PMK