PXI

We offer PXI digitizer cards with sampling rates ranging from 100kS/s to 4GS/s (with PXI-H cards from Keysight). Depending on the make and model, our solutions include:
- ADC resolution of 8, 10, 12, 14 or 16 bits
- Number of channels: 1, 2, 4, 8 and 16 (expandable by adding more cards)
- Onboard memory of up to 1 Giga samples (model dependent)
- Digitizer with on board FPGA (available only with high speed digitizer; i.e. >500MS/s)
- Firmware for peak detect, block averaging, simultaneous acquisition & multi buffer readout, time to digital conversion & analysis and custom (user programmed) analysis (available on select models)

 

  • Find
Product Image Name Description Category Manufacturer
mx-31xx
MX.31XX

The MX.31xx series allows recording of two or four channels with sampling rates of 1 MS/s, 10 MS/s or 25 MS/s. Due to the proven design a wide variety of 12 bit A/D converter boards for PXI bus can be offered. These boards are available in several versions and different speed grades making it possible for the user to find an individual solution.

Sample rates from 1 kS/s - 10 MS/s Spectrum
mx-49xx
MX.49XX

The MX.49xx cards allow recording of up to four channels with sampling rates of 25 MS/s or two channels with sampling rates of 50 MS/s. These cards offer outstanding A/D features both in resolution and speed for PXI. The cards can be switched between Single-Ended inputs with a programmable offset and true differential inputs.

Sample rates from 1 kS/s - 10 MS/s Spectrum
mx-20xx
MX.20XX

The 2 models of the MX.20xx series are designed for the fast and high quality data acquisition. Every of the up to four input channels has its own A/D converter and its own programmable input amplifier. This allows to record signals with 8 bit resolution without any phase delay between them.

Sample rates from 20 MS/s - 500 MS/s Spectrum
mx-46xx
MX.46XX

The MX.46xx for the first time offers 16 bit resolution synchronously on four channels at very high sampling rates. Every channel has its own amplifier and A/D converter. This eliminates the problems known from multiplexed systems like phase error between the channels or high crosstalk.

Sample rates from 1 kS/s - 10 MS/s Spectrum
mx-30xx-pxi-20-500
MX.30XX

The 7 models of the MX.30xx series are designed for the fast and high quality data acquisition. Every of the up to four input channels has its own A/D converter and its own programmable input amplifier. This allows to record signals with 12 bit resolution without any phase delay between them.

Sample rates from 20 MS/s - 500 MS/s Spectrum
m9211a
M9211A

The M9211A is a one-slot 3U PXI-Hybrid single-channel Ultra-wideband IF digitizer able to capture signals at up to 3 GHz and running at up to 4 GS/s, significantly reducing data acquisition and testing times. The M9211A UWB IF Digitizer comes with on-board memory of up to 512 MBytes. Ideal for very high frequency signal capture in applications such as A&D, telecommunications, ATE, and semiconductor testing. The M9211A is also a lower-cost alternative to the M9202A 12-bit IF Digitizer.

Sample rate > 500 MS/s Keysight
mx-47xx
MX.47XX

The MX.47xx for the first time offers full 16 bit resolution synchronously on eight channels at high sampling rates. Every channel has its own amplifier and A/D converter. This eliminates the problems known from multiplexed systems like phase error between the channels or high crosstalk.

Sample rates from 1 kS/s - 10 MS/s Spectrum
mx-40xx-pxi-20-500
MX.40XX

The MX.40xx is best suitable for applications that need high sampling rates as well as a maximum signal dynamic. These boards offer a resolution 4 times higher than 12 bit boards. On the MX.40xx every channel has its own amplifier and A/D converter. Each input channel can be adapted to a wide variety of signal sources. This is done by software selecting a matching input range, an input impedance and an individual input offset

Sample rates from 20 MS/s - 500 MS/s Spectrum