Probes

Probe is a physical device used to connect electronic test equipment
They range from very simple, rugged devices to complex probes that are sophisticated, expensive, and fragile.

  • Find

Sub Categories

current-probes.1

Current probes sense the current flowing through a conductor and convert it to a voltage that can be viewed...

general-purpose-probes

Passive Probes

 

high-voltage-probes

We offer high voltage probes which define the state of the art in high voltage measurements.

tetris-active-probe-system

High Impedance Active Probe. Active Probe can contact adjacent square pins in  2.54 mm pitch simultaneously....

Product Image Name Description Category Manufacturer
ss-250-ss-240a
SS-250/SS-240A

Displays its capabilities in full force in current waveform observation and wide-band applications such as switching power supplies, optical disc manufacturing lines, and semiconductor power devices.

Current Probes IWATSU
pml-high-z-probes
PML High-Z Probes

The compact built of the PML Series with a diameter of 2.5 mm at the Probe Tip facilitates measurements in dense SMD circuits, because of the good visibility of the device under test its small body provides.The low input capacitance loads the measuring point with only 9.5 pF. Less load is only achieved by active probes.

Passive Probes PMK
hv-p60
HV-P60

This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 60 kV, and the attenuation is 2000:1.

High-Voltage Probes IWATSU
tetris-1000
TETRIS® 1000

High Impedance Active Probe.

Active Probe can contact adjacent square pins in  2.54 mm pitch simultaneously. The probe‘s housing is T-shaped  so that many probes can be positioned next to each other in a never ending chain.

Active Probe System PMK
ss-270-ss-260
SS-270/SS-260

Model performing a high current measurment of  150A and 500A,Large caliber clamped current measurements,Clamp type to enable measurements to be done  easily without severing the circuit,Equipped with a simple protection function for
excessive input.

Current Probes IWATSU
pml-low-z-probes
PML Low-Z Probes

The compact built of the PML Series with a diameter of 2.5 mm at the Probe Tip facilitates measurements in dense SMD circuits, because of the good visibility of the device under test its small body provides.

Passive Probes PMK
hv-p30
HV-P30

This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 30 kV, and the attenuation is 1000:1

High-Voltage Probes IWATSU
tetris-1500
TETRIS® 1500

High Impedance Active Probe.
Active Probe can contact adjacent square pins in 2.54 mm pitch simultaneously. The probe‘s housing is T-shaped so that many probes can be positioned next to each other in a never ending chain

Active Probe System PMK