Request For Quotation

Request For Information

Expert Vibro

Manufacturer: Delphin show products

With its Expert Vibro device, Delphin have successfully combined the processing of complex functions with high levels of flexibility in a user-friendly system. Vibration measurement systems can now be used where they had previously been economically infeasible. The device is equipped with a high powered, dual core FPGA processor based on ARM technology giving users ample reserves of processing power.

{tab Description}

Vibration measurement – Compact, intelligent and fast
Expert Vibro combines the requirements and functioning of modern vibration measurement systems into a highly compact device. Other systems usually require multiple equipment. Vibration measurement is made easy with Expert Vibro. System installation and familiarization are short so that users can quickly start processing their data.

Local and decentralized interfaces

  • LAN interface to data networks
  • USB Host and device
  • 2 x PROFIBUS DPV1 slave (redundant)
  • MODBUS RTU/TCP interface
  • Optional integrated Wi-Fi/GSM / UMTS/LTE

Monitoring and online analysis functions:

  • Fast limit value monitoring of time signals
  • Monitoring of characteristic values
  • Online transfer of measurement data
  • Online spectrum up to 12,800 lines
  • Phase characteristics, frequency and amplitude characteristics
  • Record-keeping and statistic functions
  • Integration functions (two-stage)

{tab Features}

  • 8 / 16 synchronous analog inputs, 50 kHz sampling rate per channel, IEPE, mV, mA sensors selectable via software
  • Integrated comparators for Keyphasor® sensors
  • 16 GB data logger memory
  • 4 digital inputs for frequency measurement
  • 4 analog outputs for monitoring
  • 8 digital outputs
  • Display for reading data on-site
  • Pluggable screw terminals, DIN rail-mounting

{tab Applications}

Expert Vibro is suitable for many different types of application. It has universal sensor inputs which can be switched, via software, to the sensor type required. IEPE accelerometer, speed or vibration sensors are easy to connectTypical applications

Typical Applications:

  • Monitoring and observation of shaft vibration on turbines, compressors, engines or boosters
  • Monitoring and analysis of bearing vibration and wear
  • Monitoring and analysis of pressure vibrations
  • Drive unit measurements (condition monitoring)
  • Continuous operation in industrial plants or test stands
  • Remote monitoring of equipment and machinery

Bearing Vibration:

  • Measurement, recording and monitoring of absolute bearing vibration on machines with roller-bearinged, rotating components such as electric motors, pumps etc.
  • Evaluation of vibration strength veff according to DIN ISO 10816
  • FFT analysis within device / frequency band monitoring
  • Bearing damage diagnostics using envelope curve frequency spectrum
  • Monitoring of vibration levels
  • Process and vibration measurement in a single device
  • Modern recording memory in device
  • Visualization and analysis in ProfiSignal using time signal diagrams trend, FFT-spectrum, FFT-cascade, orbit and polar diagrams
  • Direct calculation of envelope spectrum

Shaft Vibration:

  • Measurement, recording and monitoring of the static and dynamic movement of journal-bearinged, rotating shafts (fixed bearing housing) on turbines, compressors, boosters, large ventilators, etc.
  • Evaluation of peak to peak Spp and maximum deflection Smax according to VDI2059
  • Sensor – wire break - monitoring
  • Monitoring of static shaft position
  • Monitoring of dynamic shaft vibration
  • FFT analysis within device / frequency band monitoring
  • Speed measurement and triggering via impulse from rotating shaft
  • Process and vibration measurement within a single device
  • Intelligent recording within device
  • Visualization and analysis in ProfiSignal using time signal, trend, FFT spectrum, FFT cascade, and orbit diagrams

{tab Software}

ProfiSignal - Vibration monitoring and analysis
Expert Vibro is fully compatible with the ProfiSignal software and is available with the "Vibro" option. ProfiSignal is a complete software package for use in data acquisition analysis, visualization and automation.
The software is very user-friendly with specialist functions that are simple to operate. ProfiSignal is modular, scalable and available in the three versions: Go, Basic and Klicks.

  • ProfiSignal Go: Software for measurement data acquisition
  • ProfiSignal Basic: Software for process visualization and monitoring
  • ProfiSignal Klicks: Software for process automation and measurement procedures

The ProfiSignal Vibro option extends ProfiSignal with the following diagrams:

  • Spectrum (FFT)
  • Cascade diagram
  • Time signal (y(t), y(x))
  • Orbit

and enables portrayal of the vibration data acquired and processed by Expert Vibro. Orbit and trend graphs portray kinetic shaft orbits including maximum Smax deflection and angular position / phase.

Expert Vibro configuration is performed using Delphin's DataService/Configurator software. The configuration procedure is based on Delphin's tried and tested, intuitive system. Both online and offline configuration is possible. The configuration data is securely stored within the Expert Vibro device.